Flat Slab - First Principle Engineering

Reinforced Concrete Design Structural Analysis

Comparative Analysis of flat Slab between MCM and EFM – Worked Example

Amuletola Rasheed Reinforced Concrete Design, Structural Analysis 4 min read November 18, 2024November 18, 2024

This article presents a comparative analysis between analysis of flat slab using moment coefficients method (MCM) in table 3.12 of BS 8110 and equivalent frame method (EFM). Moment...

Reinforced Concrete Design

Design of Flat Slab – Worked Example

Amuletola Rasheed Reinforced Concrete Design 8 min read November 11, 2024November 13, 2024

This article presents a worked example on the design of flat slab to EN 1992-1-1-2004. The plan of the flat slab to be designed is shown below. It...

Reinforced Concrete Design

Punching Shear Design to Eurocode 2 – an overview

Amuletola Rasheed Reinforced Concrete Design 8 min read November 1, 2024April 8, 2025

Punching shear occurs as a result of concentrated load or reaction acting on localized area of a slab. This mostly occurs in slabs which are directly supporting columns...