Skip to content
Newspiper light mode logo Newspiper dark mode logo
First Principle Engineering

…a repository for civil & structural engineering knowledge

  • About Us
  • Home
  • Privacy Policy
  • Contact

Tag: Pre-tension beam

Design of PSC Beam for Shear Strength – Worked Example
Prestressed Concrete Design

Design of PSC Beam for Shear Strength – Worked Example

Amuletola Rasheed Prestressed Concrete DesignPost read time 4 min read February 24, 2025April 13, 2025

This article presents a worked example on evaluating the shear strength of a prestressed concrete (PSC) beam using EN 1992-1-1-2004. The beam shown below is an I beam...

Amuletola Rasheed
Design of Prestressed Concrete Beam for Flexural Capacity – Worked Example
Prestressed Concrete Design

Design of Prestressed Concrete Beam for Flexural Capacity – Worked Example

Amuletola Rasheed Prestressed Concrete DesignPost read time 4 min read December 9, 2024February 24, 2025

This article presents a worked example on evaluating the bending capacity of a prestressed concrete beam. After verifying the stresses within a prestressed beam is within limit, it...

Amuletola Rasheed
Constructing Magnel Diagram for prestressed Concrete beam – Worked Example
Prestressed Concrete Design

Constructing Magnel Diagram for prestressed Concrete beam – Worked Example

Amuletola Rasheed Prestressed Concrete DesignPost read time 5 min read September 15, 2024February 24, 2025

This article presents a worked example on the construction of magnel diagram for the design of a prestressed beam section. The beam that shall be designed is the...

Amuletola Rasheed
Verification of Stress in a Prestressed Beam – Worked Example
Prestressed Concrete Design

Verification of Stress in a Prestressed Beam – Worked Example

Amuletola Rasheed Prestressed Concrete DesignPost read time 5 min read August 17, 2024September 14, 2024

This article shows a practical worked example on how to check the stress in a prestressed concrete beam using the combined stress approach. Verifying the stress will enable...

Amuletola Rasheed
First Principle Engineering

Recent Posts

  • Design of Steel Angles under Axial Tension and Compression – Worked Example
  • Design of Trusses
  • Basis of Actions and Load Combinations (EN 1990)
  • Second-order Effects in RC Building Frames (Eurocode 2)
  • Design of Combined Footing

Recent Comments

  1. KUUZUME MARTIN on Design of a Singly Reinforced Beam to BS 8110 – Worked Example
  2. XRumerTest on Design of Column to Eurocode 2 using Design Chart – worked example
  3. Manny Paquiao on Design of a Singly Reinforced Beam to Eurocode 2 – Worked Example
  4. Amuletola Rasheed on Design of Column to BS 8110 using Design Chart – Worked Example
  5. Engr M Idrees Khokhar Msce structure civil engineering from Lahore Pakistan on Design of Column to BS 8110 using Design Chart – Worked Example

Archives

Categories

  • Foundation Engineering
  • Prestressed Concrete Design
  • Reinforced Concrete Design
  • Structural Analysis
  • Structural Steel Design
Designed by Nasio Themes || Powered by WordPress