Skip to content
Newspiper light mode logo Newspiper dark mode logo
First Principle Engineering

…a repository for civil & structural engineering knowledge

  • About Us
  • Home
  • Privacy Policy
  • Contact

Tag: Redistribution of moment

Design of Flat Slab – Worked Example
Reinforced Concrete Design

Design of Flat Slab – Worked Example

Amuletola Rasheed Reinforced Concrete DesignPost read time 8 min read November 11, 2024November 13, 2024

This article presents a worked example on the design of flat slab to EN 1992-1-1-2004. The plan of the flat slab to be designed is shown below. It...

Amuletola Rasheed
First Principle Engineering

Recent Posts

  • Design of Steel Angles under Axial Tension and Compression – Worked Example
  • Design of Trusses
  • Basis of Actions and Load Combinations (EN 1990)
  • Second-order Effects in RC Building Frames (Eurocode 2)
  • Design of Combined Footing

Recent Comments

  1. KUUZUME MARTIN on Design of a Singly Reinforced Beam to BS 8110 – Worked Example
  2. XRumerTest on Design of Column to Eurocode 2 using Design Chart – worked example
  3. Manny Paquiao on Design of a Singly Reinforced Beam to Eurocode 2 – Worked Example
  4. Amuletola Rasheed on Design of Column to BS 8110 using Design Chart – Worked Example
  5. Engr M Idrees Khokhar Msce structure civil engineering from Lahore Pakistan on Design of Column to BS 8110 using Design Chart – Worked Example

Archives

Categories

  • Foundation Engineering
  • Prestressed Concrete Design
  • Reinforced Concrete Design
  • Structural Analysis
  • Structural Steel Design
Designed by Nasio Themes || Powered by WordPress