Skip to content
Newspiper light mode logo Newspiper dark mode logo
First Principle Engineering

…a repository for civil & structural engineering knowledge

  • About Us
  • Home
  • Privacy Policy
  • Contact

Month: December 2024

Wind Load on building – Worked Example
Structural Analysis

Wind Load on building – Worked Example

Amuletola Rasheed Structural AnalysisPost read time 4 min read December 29, 2024December 31, 2024

This article presents a worked example on wind load on a building of 10 storeys to EN 1991-1-4-2005 + A1: 2010, and the UK National Annex to the...

Amuletola Rasheed
Wind Load on buildings (Eurocode 1 part 1-4)
Structural Analysis

Wind Load on buildings (Eurocode 1 part 1-4)

Amuletola Rasheed Structural AnalysisPost read time 9 min read December 23, 2024December 31, 2024

This article presents an overview on application of wind load on building structures according to EN 1991-1-4-2005 + A1:2010 and the UK National Annex to EN 1991-1-4-2005 +...

Amuletola Rasheed
Wind Actions on Structures (Eurocode 1 part 1-4)
Structural Analysis

Wind Actions on Structures (Eurocode 1 part 1-4)

Amuletola Rasheed Structural AnalysisPost read time 16 min read December 16, 2024September 27, 2025

This article presents a comprehensive overview on wind action on structures to EN 1991-1-4-2005 + A1:2010, and the UK National Annex to EN 1991-1-4-2005 + A1: 2010. In...

Amuletola Rasheed
Design of Prestressed Concrete Beam for Flexural Capacity – Worked Example
Prestressed Concrete Design

Design of Prestressed Concrete Beam for Flexural Capacity – Worked Example

Amuletola Rasheed Prestressed Concrete DesignPost read time 4 min read December 9, 2024February 24, 2025

This article presents a worked example on evaluating the bending capacity of a prestressed concrete beam. After verifying the stresses within a prestressed beam is within limit, it...

Amuletola Rasheed
Design of Eccentrically Loaded Pad Foundation – Worked Example
Foundation Engineering Reinforced Concrete Design

Design of Eccentrically Loaded Pad Foundation – Worked Example

Amuletola Rasheed Foundation Engineering, Reinforced Concrete DesignPost read time 5 min read December 2, 2024

This article presents a worked example on the structural design of pad foundation subjected to axial load and moment to EN 1992 -1-1-2004. The geotechnical aspects of the...

Amuletola Rasheed
Connect With Me on LinkedIn 👇
Amuletola Rasheed

Recent Posts

  • Wind Load On Bridges (Eurocode 1 part 1-4)
  • Thermal actions on Bridge Decks (EN 1991-1-5)
  • Traffic Loads on Road Bridges (EN 1991-2)
  • Shrinkage and its Effects in Concrete Structures
  • Design of One-way Post-tensioned slab – Worked Example

Recent Comments

  1. Eric Jones on Design of a Singly Reinforced Beam to Eurocode 2 – Worked Example
  2. KUUZUME MARTIN on Design of a Singly Reinforced Beam to BS 8110 – Worked Example
  3. XRumerTest on Design of Column to Eurocode 2 using Design Chart – worked example
  4. Manny Paquiao on Design of a Singly Reinforced Beam to Eurocode 2 – Worked Example
  5. Amuletola Rasheed on Design of Column to BS 8110 using Design Chart – Worked Example

Archives

Categories

  • Bridge Engineering
  • Foundation Engineering
  • Prestressed Concrete Design
  • Reinforced Concrete Design
  • Structural Analysis
  • Structural Steel Design
Designed by Nasio Themes || Powered by WordPress