Design of flat slab - First Principle Engineering

Reinforced Concrete Design Structural Analysis

Comparative Analysis of flat Slab between MCM and EFM – Worked Example

This article presents a comparative analysis between analysis of flat slab using moment coefficients method (MCM) in table 3.12 of BS 8110 and equivalent frame method (EFM). Moment...

Reinforced Concrete Design

Design for punching Shear – Worked Example

Amuletola Rasheed Reinforced Concrete Design 4 min read

This article presents a worked example on the design of punching shear for flat slabs to BS EN 1992-1-1-2004 (Eurocode 2). The flat slab to be designed for...

Reinforced Concrete Design

Design of Flat Slab – Worked Example

Amuletola Rasheed Reinforced Concrete Design 8 min read

This article presents a worked example on the design of flat slab to EN 1992-1-1-2004. The plan of the flat slab to be designed is shown below. It...

Reinforced Concrete Design Structural Analysis

Flat Slab Analysis using Equivalent Frame Method – Worked Example

Amuletola Rasheed Reinforced Concrete Design, Structural Analysis 7 min read

This article presents a thorough worked example on the analysis of flat slab using equivalent frame method. At the end of the article, the analysis of the equivalent...

Reinforced Concrete Design

Design of Flat Slab – an overview

Amuletola Rasheed Reinforced Concrete Design 8 min read

This article presents guides to designing flat slabs to EN 1992-1-1-2004 as well as the superseded UK standard BS 8110-1-1997. Flat slabs are slabs that are directly supported...