Design of Axially loaded Pad Foundation – Worked Example
This article presents a worked example on the structural design of axially loaded pad foundation to EN 1992 -1-1-2004. The geotechnical aspects of the design shall be approached...
Tag: Reinforced Concrete
Design of Flat Slab – Worked Example
This article presents a worked example on the design of flat slab to EN 1992-1-1-2004. The plan of the flat slab to be designed is shown below. It...
Design of continuous one-way spanning RC slab – Worked Example
This article presents a worked example on the analysis and design of continuous one-way reinforced concrete slab. The bending moments and shear forces are obtained using tabular coefficients...
Design of Half-turn Staircase to Eurocode 2 – Worked Example
This article presents a worked example on the design of half-turn staircase to Eurocode 2. The staircase to be designed connects the ground floor and the first floor...
Design of Slender Column to BS 8110 – Worked Example
A slender column is a column that is vulnerable to buckling which affects its maximum load bearing capacity. Several codes of practice have devised diverse methods to analyse...
Design of Slender Column to Eurocode 2 – Worked Example
A slender column is a column that is vulnerable to buckling which prevents it from harnessing its maximum strength. Several codes of practice have devised diverse methods to...
Design of Biaxial Column to BS 8110 – Worked Example
A biaxial column is that which is subjected to moment about the two orthogonal axes. These types of columns are particularly found as corner columns in building structures....