Design of RC Flange beam to BS 8110 – Worked Example
This article presents a work example on the design of flanged beam to BS 8110-1-1997. The Beam 2 (shown in the plan below) that shall be designed here...
Tag: BS 8110
Design of continuous one-way spanning RC slab – Worked Example
This article presents a worked example on the analysis and design of continuous one-way reinforced concrete slab. The bending moments and shear forces are obtained using tabular coefficients...
Structural Design of half-turn staircase to BS 8110 – Worked Example
This article presents a worked example on the design of half-turn staircase to BS 8110-1:1997 (Click here to study the design of the same staircase to Eurocode 2)....
Structural Design of Staircase – an overview
A staircase is a structural element that provides upward mobility in a building and similar structures. It provides access from one floor to another adjacent floor below or...
Design of Biaxial Column to BS 8110 – Worked Example
A biaxial column is that which is subjected to moment about the two orthogonal axes. These types of columns are particularly found as corner columns in building structures....
Design of Column to BS 8110 using Design Chart – Worked Example
Column design charts are created to simplify the design of reinforced concrete columns. These charts are published by British Standard Institution (BSI) and are available in part 3...
Design of Column to BS 8110 – an overview
Columns are mostly used to transfer load from superstructure to foundation or to transfer members.
Design of Flange Beam to BS 8110: an Overview
A flange section is that which has a rectangular extension from the main rectangular body. The extension is called a flange while the rectangular body is called web....
Design of a Doubly Reinforced Beam to BS 8110 – Worked example
This article presents a worked example on the design of doubly reinforced beam to BS 8110
Design of a Singly Reinforced Beam to BS 8110 – Worked Example
This article presents a worked example of the design of singly reinforced concrete beam to BS 8110.
Design of Reinforced Concrete Beam to BS 8110:1:1997: an Overview
The design approach to designing reinforced concrete beam to BS 8110:1:1997 is to design for ultimate limit state and check whether serviceability limit state criteria are met. The...